Disc Cutters

TS 230 F is a light and robust tile saw with a powerful electric motor for all types of tiles and clinkers. The table saw enables longer working shifts thanks to the unique water recovery system. With TS 230 F you get a maximum cutting depth of 46 mm in one pass or up to 92 mm by step cutting. Patented rigid cutting guide with fine adjustment. Greater precision as material stays flat when 45° cut is made. For comfortable operation and easy transportation. The large removable cutting table is easy to clean.

The Husqvarna K 770 is a powerful all-round power cutter with features that make it one of the best power cutters on the market. Equipped with semi-automatic Smart Tension™ system allows for optimal power transmission, minimum wear and maximum belt life. The light weight, outstanding power-to-weight ratio, the reliable start and exceptionally low vibrations mean less strain and maximized productivity. Suitable for road work and easy to cut in a straight or curved track or close to sidewalk when used with KV7 trolley.

The Husqvarna K770 Oil Guard is even more advanced than the very popular K760 Oil guard model. The principle of the Oil Guard technology is that the machine detects whether there is enough oil in the system. A special pigment in the oil is picked up by the sensor and it goes into limp mode if the quantity or type of oil isn't sufficient. Husqvarna's K760 Oil guard has gained a reputation for quality and reliability and this new K770 Oil Guard model has some incremental improvements which raise the bar even higher. With an improved digital ignition, stronger cutting arm and a dynamic belt tensioning system, this market-leading power cutter is outperforming its predecessor.

This electric all-round cutter minimises the amount of water and slurry. Unlike other electric cutters, the blade rotates forward, cutting into the material efficiently with minimum effort on the operator. K 4000 is easily adaptable for dry cutting with the Vac attachment accessory for minimal dust generation. The new pop-up carbon brushes protects the collector from unforeseen rotor changes which increases reliability and enables longer service intervals. The integrated regulator controls the water volume, ensuring a constant flow to the blade. It also ensures the amount of water is sufficient to bind the dust without creating an excess of water. The one-piece inspection lid and Torque screws make it easy to assemble and service. Power cord inlet located underneath the handle enables ease of use and comfortable handling with hassle free operation.

Our compact and lightest rescue cutter is specially developed for rescue and clearing work. The magnesium blade guard is designed to be visible in smoke and water spray, and the digital ignition system provides a reliable and quick start in any emergency situation. Used and trusted by fire services around the world. Enhanced carrying strap and larger carabines for heavy duty jobs. Allows you to run, walk and climb smoothly with the machine in urgent situations. The semi-automatic Smart Tension minimises the risk of under- and over tensioning. Specially designed starter handle, with room for heavy gloves. With decreased weight and reflective decals for high visibility in smoke and water spray, which enhances control of the cutter.

TS 400 F is an efficient universal masonry saw with high cutting capacity for all kinds of bricks and building blocks. With this table saw you get a maximum cutting depth of 125 mm in one pass or up to 230 mm by step cutting. You can easily plunge or bevel cut at 45 degrees for maximum versatility. The robust single-piece frame with integrated conveyor rails gives great rigidity and provides longer product life. The machine is easy to handle by one person thanks to the foldable legs. The collection tray enables efficient slurry handling for long pump life. A sturdy reliable motor provides long product life.

TS 400 F is an efficient universal masonry saw with high cutting capacity for all kinds of bricks and building blocks. With this table saw you get a maximum cutting depth of 125 mm in one pass or up to 230 mm by step cutting. You can easily plunge or bevel cut at 45 degrees for maximum versatility. The robust single-piece frame with integrated conveyor rails gives great rigidity and provides longer product life. The machine is easy to handle by one person thanks to the foldable legs. The collection tray enables efficient slurry handling for long pump life. A sturdy reliable motor provides long product life.

Some jobs require exceptional power. The K 1270 is a real powerhouse with an impressive 5,8 kW output, turning your heaviest cutting jobs into a fast and effective operation. Suitable for road works when used with the corresponding KV 9/12 trolley. The trolley also means you can fully concentrate on the cutting job. The unique design of the carburettor, cylinder and digital ignition system, together with air purge and decompression valve ensure an easy start. Patented X-torque TM engine that uses air to flush out the cylinder provides exceptional power but keeps fuel consumptions and emissions low. Contributes to a light weight which gives an improved power-to-weight ratio. New stepless adjustment makes it easier to change cutting position. Reduced vibrations in the cutter handle for more comfort and longer operation periods.  

Our Cut-n-Break method is the natural choice when you need to cut deep at low maintenance costs. The K 760 Cut-n-Break enables you to cut as deep as 400 mm from one side. The two high-speed blades make a core in the saw cut, which can then easily be broken off using the accompanying breaking tool. This way you easily work your way through the material, at a very low diamond tool and maintenance cost. Delivered with twin blades and a breaking tool. With the unique cut-n-break method you can work your way through the material step-by step at a low tool cost. Twin blades, with a very stable core and cutting performance are delivered with the machine. The long body and double cutting blades allow you to make cuts up to 400 mm deep. Optimised engine performance through efficient cylinder design, digital ignition system and X-Torque engine technology.

Our most lightweight and compact petrol push floor saw for asphalt and concrete cutting. Ideal for job sites that are difficult to access and for small repair jobs, up to 125 mm cutting depth. FS 305 is very easy to handle and can be transported in a small vehicle. Very light weight facilitating transport and handling. Engine and blade shaft mounting system increases comfort and gives excellent cutting performance. The IntelliSeal blade shaft system allows for a minimum of 250 maintenance-free hours without daily greasing of bearings. Adjustable handle and extendable right rear wheel for increased stability.

Cutting a rail track takes power, precision and speed. The K 1270 Rail is the market's most powerful cutter, customised for railways, tram tracks and metro systems. It cuts fast and straight, the attachment mounts quickly to the rail and the double attachment mountings means you can cut from any direction. The unique design of the carburettor, cylinder and digital ignition system, together with air purge and decompression valve ensure an easy start. The RA 10 attachment fastens to the track to ensure a perfect right-angle cut. The RA 10 attachment is included as standard and allows cutting from both sides of the track. Reduced vibrations in the cutter handle for more comfort and longer operation periods.

Cutting a rail track takes power, precision and speed. The K 1270 Rail is the market's most powerful cutter, customised for railways, tram tracks and metro systems. It cuts fast and straight, the attachment mounts quickly to the rail and the double attachment mountings means you can cut from any direction. The unique design of the carburettor, cylinder and digital ignition system, together with air purge and decompression valve ensure an easy start. The RA 10 attachment fastens to the track to ensure a perfect right-angle cut. The RA 10 attachment is included as standard and allows cutting from both sides of the track. Reduced vibrations in the cutter handle for more comfort and longer operation periods.

Husqvarna K 7000 is equipped with high frequency PRIME™ technology, making it our most powerful electric cutter ever. The high power output, well-balanced body and low vibration levels make this machine very efficient and easy to use. The PRIME™ product range enables you to combine the system that is most efficient for your business. K 7000 can be used with either PP 70, PP 220 or PP 492 as a power source. Expand the system as your needs develop. This product is available for the Nordic countries. For rest of the world in Q3/Q4. Contact a sales representative for more information. High power output which operates on both 3-phase (5.5 kW) at 180-480 V and 1-phase (1.5-3 kW) 120–240 V. Increased cutting performance giving higher productivity when paired with PP 70. Contributes to a light weight which gives an improved power-to-weight ratio and cutting depth now up to 155 mm. New step less adjustment makes it easier to change cutting position. Comfortable stop time on the rotating blade giving increased comfort and safety when paired with PP 70.

K 7000 Chain is equipped with high frequency PRIME™ technology, making it a very powerful electric chain cutter. The high power output, well-balanced body and low vibrations make this machine very efficient and easy to use. With K 7000 Chain it is possible to cut 455 mm deep from one side, making this machine a great complement to wall saws to avoid overcutting at corners. It is also ideal for cutting irregular or small openings (as small as 11x11 cm). The PRIME™ product range enables you to combine the system that is most efficient for your business. K 7000 Ring can be used either with PP 70, PP 220 or PP 492 as a power source. Expand the system as your needs develop. This product is available for the Nordic countries. For rest of the world in Q3/Q4. Contact a sales representative for more information. Increased cutting performance giving higher productivity when paired with PP 70. Possible to cut 455 mm from one side indoor and outdoor. High power output which operates on both 3-phase (5.5 kW) at 180-480 V and 1-phase (1.5-3 kW) 120–240 V. Comfortable stop time on the rotating blade giving increased comfort and safety when paired with PP 70.