Navigation

No products in the cart.

Shop

Return to Previous Page
Description

Description

Auger Torque’s Earth Drills are built to the most exacting standards using only high quality materials and the latest manufacturing techniques available.

150MM HEX SHAFT

The driveshaft is crucial for reliability and it goes without saying that the bigger the better applies here. A shaft is always stronger when machined as a hex and the 150mm diameter is the largest in the industry, especially when looking at compatibility on machine as small as 21T.

AXIAL PISTON MOTOR

Axial Piston Motors allow us to run a single speed motor. By using an axial piston motor with our drive we can have a high speed motor but still achieve high torques through the gearbox multiplication. At maximum flow we achieve 15 rpm.

SINGLE PIECE NON-DISLODGEMENT SHAFT

As standard with all of our auger & screw pile drives, our patented single-piece non-dislodgement shaft is of course a standard feature. We are so confident in this must have safety feature that we are covering it with a lifetime warranty.

EPICYCLIC GEARBOX

Torque is amplified by using the unique Auger Torque planetary gearbox. This system allows the motors output torque to be multiplied with extreme efficiency as well as ensuring the durability and reliability you need.

 

FEATURES

Up to 100,069 Nm of Torque

Up to 15 rpm rotational speed

Massive 150mm Hex Shaft

Large main shaft bearings

Non-Dislodgement Shaft

Life time non-dislodgement guarantee

Low-weight at just over 1T

Single-piece driveshaft

Compatible with AT Alignment Monitors

Covered by Auger Torque’s industry leading warranty

APPLICATIONS

Large diameter & deep auger drilling

Hard Rock Auger drilling

Core barrel drilling

Pole and mast installations

Foundation piles

Large diameter screw pile installations

Rail applications

Exploration & research

Compatible with excavators from 21T onwards allowing for low impact and reasonably tight access application where typically larger machines would have to be used.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “AUGERTORQUE EARTH DRILL – 100,000 MAX – 150MM HEX SHAFT”

Related Products

ARROWHEAD R40 POST DRIVER C/W TOP BRACKET,HOSES & 1 X STEEL

RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price. Unique design for a multipurpose tool. Top mount for regular use as a breaker, side mount for post driving functions. Dual mounting allows for greater control and flexibility. Swap the point or chisel out for a post driver and quickly drive posts in. Swap to the low side mount when only driving posts to allow for ease of positioning and superior control. Making it easier to line posts up before driving them in. Low side mount allows for superior access in areas with minimal head space. In addition the low side mount means taller posts will be easier to handle.  
£2,880.00 Add to basket

ARROWHEAD R65 POST DRIVER C/W TOP BRACKET,HOSES & 1 X STEEL

RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price. Unique design for a multipurpose tool. Top mount for regular use as a breaker, side mount for post driving functions. Dual mounting allows for greater control and flexibility. Swap the point or chisel out for a post driver and quickly drive posts in. Swap to the low side mount when only driving posts to allow for ease of positioning and superior control. Making it easier to line posts up before driving them in. Low side mount allows for superior access in areas with minimal head space. In addition the low side mount means taller posts will be easier to handle.  
£4,160.00 Add to basket

ARROWHEAD R65 BREAKER C/W TOP BRACKET,HOSES & 1 X STEEL PRICE PLUS VAT

RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price Arrowhead Rockdrill’s R Range hydraulic hammers bring a new industry leading tie-rodless hammer to the market. Based around a unique design the R Range hammers eliminate the need for tie rods in the hammer assembly increasing the robustness of the hammer while simplifying its construction. The R Range hammers are a compact and powerful design suitable for a wide variety of applications all with the effective price and industry leading support our customers deserve . Features of the “R” Range
  • Tie-rod less hammer design
  • Narrow round box provides superior access to surfaces in confined spaces such as trenching work
  • Vibration and sound supressed at standard
  • The hammer can be fully serviced using no specialist tools
  • Powerful gas fired operation using less oil at lower working pressures
  • Excavator friendly
 
£3,860.00 Add to basket

ARROWHEAD ACP550 COMPACTION PLATE C/W TOP BRACKET & HOSES

RTC Plant supply the top bracket and hoses all of which is included in the price. All Arrowhead Rockdrill ACP plate compactors / drivers employ a unique ‘V Profile’ design, delivering superior vibration suppression by the use of oversized in-line dampening mounts. Manufactured from the highest quality steels, US & European made bearings and robust US built oversized hydraulic motors, ACP compactors are designed to provide a long service life with minimal maintenance. By incorporating Oil Splash Technology the bearings are auto-lubricated to prevent downtime while maximising productivity, as there is no greasing required. The simplicity, quality and reliability of ARROWHEAD ROCKDRILL ACP plate compactors ensure maximum return on investment and jobsite efficiency giving you that essential competitive edge. ARROWHEAD ROCKDRILL, a world leader in Construction Attachment technology and innovation offer a full line of Vibratory Plate Compactors.
  • Backfill trench compaction
  • Sheet, post and pile driving
  • Soil compaction
 
£4,300.00 Add to basket

ARROWHEAD R70S SKID STEER BREAKER C/W TOP BRACKET,HOSES & 1 X STEEL

RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price The Arrowhead RS Range hammers are specifically engineered to suit the skid steer excavator application. With a rugged heavy duty box design capable of withstanding the unique operating angles associated with skid steer excavators the RS range can easily tackle any demolition task on the Job site. The RS Ranges oversized isolators located inside the hammer box ensure vibration is contained to protect the excavator and operator from vibration caused by the hammer during operation. With only three moving parts and no tie rods the RS hammers are robust, reliable and powerful and perfectly suited to any skid steer excavator.  
£4,645.00 Add to basket

ARROWHEAD R55 BREAKER C/W TOP BRACKET,HOSES & 1 X STEEL PRICE PLUS VAT

RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price Arrowhead Rockdrill’s R Range hydraulic hammers bring a new industry leading tie-rodless hammer to the market. Based around a unique design the R Range hammers eliminate the need for tie rods in the hammer assembly increasing the robustness of the hammer while simplifying its construction. The R Range hammers are a compact and powerful design suitable for a wide variety of applications all with the effective price and industry leading support our customers deserve . Features of the “R” Range
  • Tie-rod less hammer design
  • Narrow round box provides superior access to surfaces in confined spaces such as trenching work
  • Vibration and sound supressed at standard
  • The hammer can be fully serviced using no specialist tools
  • Powerful gas fired operation using less oil at lower working pressures
  • Excavator friendly
 

£3,550.00 Add to basket

ARROWHEAD R45S SKID STEER BREAKER C/W TOP BRACKET,HOSES & 1 X STEEL

RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price The Arrowhead RS Range hammers are specifically engineered to suit the skid steer excavator application. With a rugged heavy duty box design capable of withstanding the unique operating angles associated with skid steer excavators the RS range can easily tackle any demolition task on the Job site. The RS Ranges oversized isolators located inside the hammer box ensure vibration is contained to protect the excavator and operator from vibration caused by the hammer during operation. With only three moving parts and no tie rods the RS hammers are robust, reliable and powerful and perfectly suited to any skid steer excavator.  
£3,150.00 Add to basket

ARROWHEAD R55S SKID STEER BREAKER C/W TOP BRACKET,HOSES & 1 X STEEL

RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price The Arrowhead RS Range hammers are specifically engineered to suit the skid steer excavator application. With a rugged heavy duty box design capable of withstanding the unique operating angles associated with skid steer excavators the RS range can easily tackle any demolition task on the Job site. The RS Ranges oversized isolators located inside the hammer box ensure vibration is contained to protect the excavator and operator from vibration caused by the hammer during operation. With only three moving parts and no tie rods the RS hammers are robust, reliable and powerful and perfectly suited to any skid steer excavator.
  • Vibration and sound suppressed as standard
  • Powerful gas fired operation using less oil at lower working pressures
  • Heavy duty box design for specialist Skid Steer application
£3,895.00 Add to basket

ARROWHEAD R80 BREAKER C/W TOP BRACKET,HOSES & 1 X STEEL

RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price Arrowhead Rockdrill’s R Range hydraulic hammers bring a new industry leading tie-rodless hammer to the market. Based around a unique design the R Range hammers eliminate the need for tie rods in the hammer assembly increasing the robustness of the hammer while simplifying its construction. The R Range hammers are a compact and powerful design suitable for a wide variety of applications all with the effective price and industry leading support our customers deserve . Features of the “R” Range
  • Tie-rod less hammer design
  • Narrow round box provides superior access to surfaces in confined spaces such as trenching work
  • Vibration and sound supressed at standard
  • The hammer can be fully serviced using no specialist tools
  • Powerful gas fired operation using less oil at lower working pressures
  • Excavator friendly
 
£5,380.00 Add to basket

ARROWHEAD ACP350 COMPACTION PLATE C/W TOP BRACKET & HOSES

RTC Plant supply the top bracket and hoses all of which is included in the price. All Arrowhead Rockdrill ACP plate compactors / drivers employ a unique ‘V Profile’ design, delivering superior vibration suppression by the use of oversized in-line dampening mounts. Manufactured from the highest quality steels, US & European made bearings and robust US built oversized hydraulic motors, ACP compactors are designed to provide a long service life with minimal maintenance. By incorporating Oil Splash Technology the bearings are auto-lubricated to prevent downtime while maximising productivity, as there is no greasing required. The simplicity, quality and reliability of ARROWHEAD ROCKDRILL ACP plate compactors ensure maximum return on investment and jobsite efficiency giving you that essential competitive edge. ARROWHEAD ROCKDRILL, a world leader in Construction Attachment technology and innovation offer a full line of Vibratory Plate Compactors.
  • Backfill trench compaction
  • Sheet, post and pile driving
  • Soil compaction
 
£3,100.00 Add to basket
Back to top