Navigation

No products in the cart.

Shop

Return to Previous Page
Description

Description

Auger Torque’s Earth Drills are built to the most exacting standards using only high quality materials and the latest manufacturing techniques available.

150MM HEX SHAFT

The driveshaft is crucial for reliability and it goes without saying that the bigger the better applies here. A shaft is always stronger when machined as a hex and the 150mm diameter is the largest in the industry, especially when looking at compatibility on machine as small as 21T.

AXIAL PISTON MOTOR

Axial Piston Motors allow us to run a single speed motor. By using an axial piston motor with our drive we can have a high speed motor but still achieve high torques through the gearbox multiplication. At maximum flow we achieve 15 rpm.

SINGLE PIECE NON-DISLODGEMENT SHAFT

As standard with all of our auger & screw pile drives, our patented single-piece non-dislodgement shaft is of course a standard feature. We are so confident in this must have safety feature that we are covering it with a lifetime warranty.

EPICYCLIC GEARBOX

Torque is amplified by using the unique Auger Torque planetary gearbox. This system allows the motors output torque to be multiplied with extreme efficiency as well as ensuring the durability and reliability you need.

 

FEATURES

Up to 100,069 Nm of Torque

Up to 15 rpm rotational speed

Massive 150mm Hex Shaft

Large main shaft bearings

Non-Dislodgement Shaft

Life time non-dislodgement guarantee

Low-weight at just over 1T

Single-piece driveshaft

Compatible with AT Alignment Monitors

Covered by Auger Torque’s industry leading warranty

APPLICATIONS

Large diameter & deep auger drilling

Hard Rock Auger drilling

Core barrel drilling

Pole and mast installations

Foundation piles

Large diameter screw pile installations

Rail applications

Exploration & research

Compatible with excavators from 21T onwards allowing for low impact and reasonably tight access application where typically larger machines would have to be used.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “AUGERTORQUE EARTH DRILL – 150,000 MAX – 150MM HEX SHAFT”

Related Products

AUGERTORQUE MT600 TRENCHER EXCAVATORS 2.5 TO 4.5 T & SKIDSTEER LOADERS C/W HOSES (QRC`S NOT INCLUDED)

The Auger Torque MT Range of trenchers are designed for Excavators between 2.5T-5T, Skid Steer Loaders up to 80hp and also Mini Loaders. With only the highest quality hydraulic motors and using Auger Torque’s own planetary gearbox, our trenchers have the reliability and power to ensure your trenching is carried out with ease. Chains are available in several different tooth configurations, whether you’re trenching in soft ground, mixed grounds or even permafrost allowing you to get the job done no matter what environment you are in. With the precision depth control skid the operator can accurately set the desired trench depth and be sure of accuracy for the entire length. There is a choice of 3 chain options for each machine to allow for differing ground conditions. Check the part numbers below for chain assembly, teeth etc for availability and price in our spare parts section option replacement parts. Chain width                   100mm    150mm    200mm   250mm   300mm MT 600 Earth                44-2901  44-2903   44-2905   44-2940    44-2936 MT 600 Combination  44-2902  44-2904    44-2906   44-2919   44-2937 MT 600 Tungsten        44-2918   44-2913   44-2914    44-2945   44-2938 Part Number            Description 44-2010            Earth Tooth Left Hand 44-2011            Earth Tooth Right Hand 44-2001            Tungsten Tooth Left Hand 44-2002            Tungsten Tooth Centre 44-2003            Tungsten Tooth Right Hand
£4,336.47 Add to basket

ARROWHEAD R40 BREAKER C/W TOP BRACKET,HOSES & 1 X STEEL PRICE plus VAT

RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price Arrowhead Rockdrill’s R Range hydraulic hammers bring a new industry leading tie-rodless hammer to the market. Based around a unique design the R Range hammers eliminate the need for tie rods in the hammer assembly increasing the robustness of the hammer while simplifying its construction. The R Range hammers are a compact and powerful design suitable for a wide variety of applications all with the effective price and industry leading support our customers deserve . Features of the "R" Range
  • Tie-rod less hammer design
  • Narrow round box provides superior access to surfaces in confined spaces such as trenching work
  • Vibration and sound supressed at standard
  • The hammer can be fully serviced using no specialist tools
  • Powerful gas fired operation using less oil at lower working pressures
  • Excavator friendly
 
£2,600.00 Add to basket

AUGERTORQUE T150 59″/150CM HEDGE TRIMMER FITS 2.5 TO 4.5 TONNE EXCAVATOR C/W MOTOR

The Auger Torque Hedge Trimmer is the perfect addition for excavators (2.5T - 4.5T) and Skid steer loaders, and offers a variety of motor sizes to suit your application. The newly designed mounting frame allows you to quickly switch the Hedge Trimmer between the left and right hand side of the parent machine. When fitted to a Skid Steer, it can also be used to cut grass and brush. Attaching the optional tooth extension provides a full 2.5m cutting length. This is sure to make trimming more precise, efficient and will provide yet another way to expand the versatility of existing machines.  
£2,502.30 Add to basket

ARROWHEAD R45 BREAKER C/W TOP BRACKET,HOSES & 1 X STEEL PRICE PLUS VAT

RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price Arrowhead Rockdrill’s R Range hydraulic hammers bring a new industry leading tie-rodless hammer to the market. Based around a unique design the R Range hammers eliminate the need for tie rods in the hammer assembly increasing the robustness of the hammer while simplifying its construction. The R Range hammers are a compact and powerful design suitable for a wide variety of applications all with the effective price and industry leading support our customers deserve . Features of the “R” Range
  • Tie-rod less hammer design
  • Narrow round box provides superior access to surfaces in confined spaces such as trenching work
  • Vibration and sound supressed at standard
  • The hammer can be fully serviced using no specialist tools
  • Powerful gas fired operation using less oil at lower working pressures
  • Excavator friendly
 
£3,030.00 Add to basket

ARROWHEAD R55 POST DRIVER C/W TOP BRACKET,HOSES & 1 X STEEL

RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price. Unique design for a multipurpose tool. Top mount for regular use as a breaker, side mount for post driving functions. Dual mounting allows for greater control and flexibility. Swap the point or chisel out for a post driver and quickly drive posts in. Swap to the low side mount when only driving posts to allow for ease of positioning and superior control. Making it easier to line posts up before driving them in. Low side mount allows for superior access in areas with minimal head space. In addition the low side mount means taller posts will be easier to handle.  
£3,795.00 Add to basket

AUGERTORQUE 51-8925 1M HEDGE TRIMMER EXTENSION BAR FOR T150

This attachment is the perfect addition for excavators (1.5 – 8T) and skid steer loaders, and offers a variety of motor sizes to suit your application. Attaching to an excavator provides extra-long cutting reach, gaining access to those taller trees, deeper hedges etc. The Hedge Trimmer is also ideal for cutting long grass and brush. Individually replaceable teeth with paired finger bars mean damage cause by debris such as hidden fencing wire is kept to a minimum and is easily repaired. Attaching the optional tooth extension bar provides a full 2.5m cutting length. This is sure to make trimming more precise, efficient and will provide yet another way to expand the versatility of existing machines
£707.43 Add to basket

ARROWHEAD ACP200 COMPACTION PLATE C/W TOP BRACKET & HOSES

RTC Plant supply the top bracket and hoses all of which is included in the price. ALL Arrowhead Rockdrill ACP plate compactors / drivers employ a unique ‘V Profile’ design, delivering superior vibration suppression by the use of oversized in-line dampening mounts. Manufactured from the highest quality steels, US & European made bearings and robust US built oversized hydraulic motors, ACP compactors are designed to provide a long service life with minimal maintenance. By incorporating Oil Splash Technology the bearings are auto-lubricated to prevent downtime while maximising productivity, as there is no greasing required. The simplicity, quality and reliability of ARROWHEAD ROCKDRILL ACP plate compactors ensure maximum return on investment and jobsite efficiency giving you that essential competitive edge. ARROWHEAD ROCKDRILL, a world leader in Construction Attachment technology and innovation offer a full line of Vibratory Plate Compactors.
  • Backfill trench compaction
  • Sheet, post and pile driving
  • Soil compaction
 
£2,800.00 Add to basket

ARROWHEAD R75 BREAKER C/W TOP BRACKET,HOSES & 1 X STEEL

RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price Arrowhead Rockdrill’s R Range hydraulic hammers bring a new industry leading tie-rodless hammer to the market. Based around a unique design the R Range hammers eliminate the need for tie rods in the hammer assembly increasing the robustness of the hammer while simplifying its construction. The R Range hammers are a compact and powerful design suitable for a wide variety of applications all with the effective price and industry leading support our customers deserve . Features of the “R” Range
  • Tie-rod less hammer design
  • Narrow round box provides superior access to surfaces in confined spaces such as trenching work
  • Vibration and sound supressed at standard
  • The hammer can be fully serviced using no specialist tools
  • Powerful gas fired operation using less oil at lower working pressures
  • Excavator friendly
 
£4,770.00 Add to basket

AUGERTORQUE T150 59″/150CM HEDGE TRIMMER FITS 1.5 TO 2.5 TONNE EXCAVATOR C/W MOTOR

The Auger Torque Hedge Trimmer is the perfect addition for excavators (1.5T - 2.5T) and Skid steer loaders, and offers a variety of motor sizes to suit your application. The newly designed mounting frame allows you to quickly switch the Hedge Trimmer between the left and right hand side of the parent machine. When fitted to a Skid Steer, it can also be used to cut grass and brush. Attaching the optional tooth extension provides a full 2.5m cutting length. This is sure to make trimming more precise, efficient and will provide yet another way to expand the versatility of existing machines.  
£2,502.30 Add to basket

ARROWHEAD R55 BREAKER C/W TOP BRACKET,HOSES & 1 X STEEL PRICE PLUS VAT

RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price Arrowhead Rockdrill’s R Range hydraulic hammers bring a new industry leading tie-rodless hammer to the market. Based around a unique design the R Range hammers eliminate the need for tie rods in the hammer assembly increasing the robustness of the hammer while simplifying its construction. The R Range hammers are a compact and powerful design suitable for a wide variety of applications all with the effective price and industry leading support our customers deserve . Features of the “R” Range
  • Tie-rod less hammer design
  • Narrow round box provides superior access to surfaces in confined spaces such as trenching work
  • Vibration and sound supressed at standard
  • The hammer can be fully serviced using no specialist tools
  • Powerful gas fired operation using less oil at lower working pressures
  • Excavator friendly
 

£3,550.00 Add to basket
Back to top