BOBCAT Attachments / Wood Chipper
Product Information
Categories: Attachments, Groundcare/Forestry.BOBCAT DEALERS IN CAMBRIDGESHIRE, NORTHAMPTONSHIRE AND BEDFORDSHIRE
POA
CONTACT Dave: [email protected]
Download: WOOD CHIPPERS SPECS PDF
The Bobcat® Wood Chipper attachment grinds branches, trees and limbs, reducing branch volume from 10 to 1. Unlike a pull-type wood chipper, this wood chipper attachment can easily be placed in back gardens and remote areas with the manoeuvrability of a Bobcat® loader. Hydraulic power feed is included as standard equipment. It allows the large-diameter feed roller to move branches into the wood chipper at a constant rate, so the operator can work safely and efficiently.
Description
Reviews (0)
Description
- Agriculture
- Forestry
- Landscaping
- Road work, Recycling and Cleaning
- The Bobcat® Wood Chipper attachment is ideal for grinding branches, trees and limbs, reducing branch volume from 10 to 1
- You can grind branches and trees up to 13 cm in diameter
- The discharge chute can be rotated 360°, giving you maximum flexibility of use
- Operate the wood chipper from the cabin or using the Bobcat® Remote Attachment Control (RAC) system. This allows the operator to start or stop the loader’s engine and chipper rotation when standing beside the attachment
- The unit comes with an automatic hydraulic feed, with speed control and a load sensing system for optimum performance and constant flow
- Large diameter, high-torque feed roller for increased efficiency and productivity
- Variable speed feed drive for adjusting the feed rate with a reversible option in case of plugging
- For more work flexibility, dual mounting locations allow material to be fed from the front or right side of the load
Be the first to review “BOBCAT Attachments / Wood Chipper” Cancel reply
Related Products
ARROWHEAD R55S SKID STEER BREAKER C/W TOP BRACKET,HOSES & 1 X STEEL
RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price
The Arrowhead RS Range hammers are specifically engineered to suit the skid steer excavator application. With a rugged heavy duty box design capable of withstanding the unique operating angles associated with skid steer excavators the RS range can easily tackle any demolition task on the Job site. The RS Ranges oversized isolators located inside the hammer box ensure vibration is contained to protect the excavator and operator from vibration caused by the hammer during operation. With only three moving parts and no tie rods the RS hammers are robust, reliable and powerful and perfectly suited to any skid steer excavator.
- Vibration and sound suppressed as standard
- Powerful gas fired operation using less oil at lower working pressures
- Heavy duty box design for specialist Skid Steer application
£3,895.00
Add to basket
ARROWHEAD R70S SKID STEER BREAKER C/W TOP BRACKET,HOSES & 1 X STEEL
RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price
The Arrowhead RS Range hammers are specifically engineered to suit the skid steer excavator application. With a rugged heavy duty box design capable of withstanding the unique operating angles associated with skid steer excavators the RS range can easily tackle any demolition task on the Job site. The RS Ranges oversized isolators located inside the hammer box ensure vibration is contained to protect the excavator and operator from vibration caused by the hammer during operation. With only three moving parts and no tie rods the RS hammers are robust, reliable and powerful and perfectly suited to any skid steer excavator.
£4,645.00
Add to basket
AUGERTORQUE T150 59″/150CM HEDGE TRIMMER FITS 1.5 TO 2.5 TONNE EXCAVATOR C/W MOTOR
The Auger Torque Hedge Trimmer is the perfect addition for excavators (1.5T - 2.5T) and Skid steer loaders, and offers a variety of motor sizes to suit your application. The newly designed mounting frame allows you to quickly switch the Hedge Trimmer between the left and right hand side of the parent machine. When fitted to a Skid Steer, it can also be used to cut grass and brush. Attaching the optional tooth extension provides a full 2.5m cutting length. This is sure to make trimming more precise, efficient and will provide yet another way to expand the versatility of existing machines.
£2,502.30
Add to basket
ARROWHEAD R65 BREAKER C/W TOP BRACKET,HOSES & 1 X STEEL PRICE PLUS VAT
RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price
Arrowhead Rockdrill’s R Range hydraulic hammers bring a new industry leading tie-rodless hammer to the market. Based around a unique design the R Range hammers eliminate the need for tie rods in the hammer assembly increasing the robustness of the hammer while simplifying its construction.
The R Range hammers are a compact and powerful design suitable for a wide variety of applications all with the effective price and industry leading support our customers deserve .
Features of the “R” Range
- Tie-rod less hammer design
- Narrow round box provides superior access to surfaces in confined spaces such as trenching work
- Vibration and sound supressed at standard
- The hammer can be fully serviced using no specialist tools
- Powerful gas fired operation using less oil at lower working pressures
- Excavator friendly
£3,860.00
Add to basket
AUGERTORQUE MT900 TRENCHER EXCAVATORS 3 TO 5 T & SKIDSTEER LOADERS C/W HOSES (QRC`S NOT INCLUDED)
The Auger Torque MT Range of trenchers are designed for Excavators between 2.5T-5T, Skid Steer Loaders up to 80hp and also Mini Loaders.
With only the highest quality hydraulic motors and using Auger Torque’s own planetary gearbox, our trenchers have the reliability and power to ensure your trenching is carried out with ease. Chains are available in several different tooth configurations, whether you’re trenching in soft ground, mixed grounds or even permafrost allowing you to get the job done no matter what environment you are in. With the precision depth control skid the operator can accurately set the desired trench depth and be sure of accuracy for the entire length.
There is a choice of 3 chain options for each machine to allow for differing ground conditions. Check the part numbers below for chain assembly, teeth etc for availability and price in our spare parts section option replacement parts.
Chain width 100mm 150mm 200mm 250mm 300mm
MT 900 Earth 44-2907 44-2909 44-2911 44-2939 44-2933
MT 900 Combination 44-2908 44-2910 44-2912 44-2915 44-2934
MT 900 Tungsten 44-2916 44-2920 44-2921 44-2941 44-2935
Part Number Description
44-2010 Earth Tooth Left Hand
44-2011 Earth Tooth Right Hand
44-2001 Tungsten Tooth Left Hand
44-2002 Tungsten Tooth Centre
44-2003 Tungsten Tooth Right Hand
£4,601.53
Add to basket
AUGERTORQUE T150 59″/150CM HEDGE TRIMMER FITS 4.5 TO 8.0 TONNE EXCAVATOR C/W MOTOR
The Auger Torque Hedge Trimmer is the perfect addition for excavators (4.5T - 8.0T) and Skid steer loaders, and offers a variety of motor sizes to suit your application. The newly designed mounting frame allows you to quickly switch the Hedge Trimmer between the left and right hand side of the parent machine. When fitted to a Skid Steer, it can also be used to cut grass and brush. Attaching the optional tooth extension provides a full 2.5m cutting length. This is sure to make trimming more precise, efficient and will provide yet another way to expand the versatility of existing machines.
£2,504.13
Add to basket
ARROWHEAD R45S SKID STEER BREAKER C/W TOP BRACKET,HOSES & 1 X STEEL
RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price
The Arrowhead RS Range hammers are specifically engineered to suit the skid steer excavator application. With a rugged heavy duty box design capable of withstanding the unique operating angles associated with skid steer excavators the RS range can easily tackle any demolition task on the Job site. The RS Ranges oversized isolators located inside the hammer box ensure vibration is contained to protect the excavator and operator from vibration caused by the hammer during operation. With only three moving parts and no tie rods the RS hammers are robust, reliable and powerful and perfectly suited to any skid steer excavator.
£3,150.00
Add to basket
ARROWHEAD R120 BREAKER C/W TOP BRACKET,HOSES & 1 X STEEL
RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price
Arrowhead Rockdrill’s R Range hydraulic hammers bring a new industry leading tie-rod less hammer to the market. Based around a unique design the R Range hammers eliminate the need for tie rods in the hammer assembly increasing the robustness of the hammer while simplifying its construction.
The R Range hammers are a compact and powerful design suitable for a wide variety of applications all with the effective price and industry leading support our customers deserve .
Features of the “R” Range
- Tie-rod less hammer design
- Narrow round box provides superior access to surfaces in confined spaces such as trenching work
- Vibration and sound supressed at standard
- The hammer can be fully serviced using no specialist tools
- Powerful gas fired operation using less oil at lower working pressures
- Excavator friendly
£14,200.00
Add to basket
ARROWHEAD R75 BREAKER C/W TOP BRACKET,HOSES & 1 X STEEL
RTC Plant supply the top bracket, hoses and 1 x steel all of which is included in the price
Arrowhead Rockdrill’s R Range hydraulic hammers bring a new industry leading tie-rodless hammer to the market. Based around a unique design the R Range hammers eliminate the need for tie rods in the hammer assembly increasing the robustness of the hammer while simplifying its construction.
The R Range hammers are a compact and powerful design suitable for a wide variety of applications all with the effective price and industry leading support our customers deserve .
Features of the “R” Range
- Tie-rod less hammer design
- Narrow round box provides superior access to surfaces in confined spaces such as trenching work
- Vibration and sound supressed at standard
- The hammer can be fully serviced using no specialist tools
- Powerful gas fired operation using less oil at lower working pressures
- Excavator friendly
£4,770.00
Add to basket
AUGERTORQUE MT600 TRENCHER EXCAVATORS 2.5 TO 4.5 T & SKIDSTEER LOADERS C/W HOSES (QRC`S NOT INCLUDED)
The Auger Torque MT Range of trenchers are designed for Excavators between 2.5T-5T, Skid Steer Loaders up to 80hp and also Mini Loaders.
With only the highest quality hydraulic motors and using Auger Torque’s own planetary gearbox, our trenchers have the reliability and power to ensure your trenching is carried out with ease. Chains are available in several different tooth configurations, whether you’re trenching in soft ground, mixed grounds or even permafrost allowing you to get the job done no matter what environment you are in. With the precision depth control skid the operator can accurately set the desired trench depth and be sure of accuracy for the entire length.
There is a choice of 3 chain options for each machine to allow for differing ground conditions. Check the part numbers below for chain assembly, teeth etc for availability and price in our spare parts section option replacement parts.
Chain width 100mm 150mm 200mm 250mm 300mm
MT 600 Earth 44-2901 44-2903 44-2905 44-2940 44-2936
MT 600 Combination 44-2902 44-2904 44-2906 44-2919 44-2937
MT 600 Tungsten 44-2918 44-2913 44-2914 44-2945 44-2938
Part Number Description
44-2010 Earth Tooth Left Hand
44-2011 Earth Tooth Right Hand
44-2001 Tungsten Tooth Left Hand
44-2002 Tungsten Tooth Centre
44-2003 Tungsten Tooth Right Hand
£4,336.47
Add to basket
Reviews
There are no reviews yet.